VST Lighting Logo

CFL to LED Conversion: Screw-In Lamps, Pin Bases and Complete Downlights

Identify whether the CFL is self-ballasted or uses external gear, then choose the supported LED route. Base keying, operating position, lamp count and controls determine the selection alongside the fitting’s available space.

Screw-base and pin-base lamps sit beside a complete downlight.

The existing CFL base is the first branch in an LED conversion. A screw-in CFL and a pin-base lamp can have different relationships with their operating equipment, even when both light a similar ceiling fitting. Identify the supplied lamp and the equipment serving it before choosing a replacement route.

Then compare the LED's working position, dimensions and control requirements with the fitting. These checks help you choose between a supported lamp replacement, a defined conversion and a complete downlight, with a clear reason for retaining or changing the existing assembly.

Start with the CFL base and the lamp being replaced

A screw-in CFL with its own control gear

A self-ballasted screw-in CFL incorporates its operating electronics into the lamp. Its replacement question starts with the correct screw base, supply conditions and room inside the fitting. The proposed LED also needs the appropriate enclosed-use and control characteristics for that location.

Read the complete lamp description. A familiar bulb shape does not identify its electrical arrangement, and a decorative cover can impose a tighter envelope than the socket position suggests. An LED that is wider near its base may occupy space differently from a spiral CFL of a similar overall length.

A pin-base CFL in an existing lighting assembly

For a plug-in CFL, include the external operating equipment in the assessment. Its replacement lamp is part of that arrangement. Keep the existing lamp code, base, ballast model and number of lamps together in the maintenance record.

The lamp and fitting identification resource is useful when those details are missing. Qualified personnel should carry out any electrical inspection or conversion. The selection process here concerns the records and product relationships needed to choose a route, rather than instructions for removing or reconnecting mains components.

Read pin count, base code and keying together

Two pins and four pins

Pin count narrows the possibilities, but the full base designation determines the intended mechanical interface. Keep the code with its suffix and the lamp arrangement. A product photograph can help locate the information, but counting visible contacts alone leaves keying and operating requirements unresolved.

Avoid treating a two-pin and a four-pin replacement as alternative versions of the same connection. Their applicable lamp and gear arrangements need to be identified separately. Choose against the actual socket and supported operating route, instead of a broadly worded “CFL replacement” title.

The position of the keys and contacts

Compare the base drawing with the socket arrangement, including locating features and the space around the plastic base. Those features determine how the lamp seats and how its light-emitting body is positioned.

Read inconsistent records cautiously. In the September 29, 2026 revision of Halco's ProLED Select Plug-In Lamp Series sheet, some ordering and specification entries use different G24Q/GX24Q descriptions. The orientation and control example below can be read from the applicable tables, while an actual socket purchase still needs an unambiguous base match. Removing keys or altering pins is not a selection solution.

CFL lamp bases show a screw cap and distinct pin-base shapes.
Read the complete base and keying rather than pin count alone.

Compare the available LED conversion routes

Retain the permitted operating equipment

A suitable lamp-level replacement keeps a useful fitting with a defined operating arrangement. For a ballast-dependent product, that includes the applicable ballast and lamp count. Read the selected LED's method first; a family name or pin shape cannot identify it reliably.

The current Halco sheet includes several methods within one plug-in family. Its 82849 is a two-pin hybrid product, while 82853 and 82854 are Type A products with horizontal and vertical operating positions respectively. This is why the individual item matters more than the family heading.

Use a specified retrofit or complete LED fitting

A defined conversion changes the assembly under the selected product's instructions. A complete downlight changes the supplied service unit more broadly. Compare each against the host and required lighting function before deciding how much of the old fitting to retain.

Existing assembly Possible LED route What remains Selection condition
Self-ballasted screw-in CFL Applicable screw-base LED lamp Suitable socket and fitting Base, supply, envelope, enclosed-use and control match
Pin-base CFL with supported gear Applicable ballast-dependent LED Suitable fitting and listed gear arrangement Exact lamp, ballast and lamp-count support
Host covered by a specified conversion Defined retrofit assembly Parts permitted by its instructions Applicable mechanical and electrical conversion scope
Unsuitable host or changed lighting brief Complete LED fitting Suitable building interfaces Cutout, mounting, optics and service requirements

Fit the LED into the actual optical space

Horizontal and vertical operating positions

A horizontal lamp places its emitting surface differently from a vertical design. The reflector and aperture then determine where that light can leave the fitting. Choosing solely by wattage can miss this relationship.

Halco identifies 82853 as horizontal and 82854 as vertical, although both are nominally 9.5W. Its drawings show different bodies for those roles. The useful comparison is between the required position and the product designed for it, rather than rotating a different lamp and assuming the optical result will be equivalent.

Length, width and the emitting face

Compare the base-to-tip length, maximum width and emitting-face position with the fitting's clear space. Include the reflector opening and any cover. A lamp that enters the socket may still place part of its body against the reflector or too far behind an obstruction.

For an assembly being retained across several rooms, identify the host variants before buying a batch. The same trim appearance may be used around different depths or lamp positions. Grouping them by their actual lamp space gives the order a more reliable basis than ordering one replacement for every round ceiling opening.

Horizontal and vertical lamp arrangements place the emitting surface differently in a fitting.
Match the operating position to the optical space.

Read the ballast and lamp-count entry

Identify the full ballast model

Locate the exact designation in the applicable manufacturer's compatibility record. A brand name or a broad wattage description is insufficient when the record distinguishes individual operating products. Keep any suffix that changes the listed model.

Also confirm that the record applies to the LED generation being considered. Halco's older 82117 product record describes a different, non-dimming product. A file associated with that older item cannot establish the current LED2 family's control support simply because both products are plug-in replacements.

Keep the number of lamps with the compatibility row

A table can include more than one row for the same ballast because the number of connected lamps changes the arrangement. Read across the selected row to the exact LED item, then preserve that whole combination in the selection.

This is particularly useful for buyers ordering for mixed fitting groups. A successful one-lamp entry does not resolve a fitting with two lamps. The required action is to read the two-lamp row and choose on that basis. You can resolve this from a complete applicable matrix before the order, rather than discovering the distinction during installation.

Keep dimming tied to the whole listed combination

Lamp, ballast and dimmer in one row

Where dimming is required, the supported combination includes the dimmer as well as the lamp, ballast and lamp count. A “dimmable” lamp description states a capability that still needs the appropriate operating arrangement.

The September 2026 Halco matrix provides a concrete reading exercise. In its Lutron NTSTV-DV group, the Philips Advance IZT-2S26-M5-BS entries show different status marks for 82854 depending on whether one or two lamps are used.

Dimmer Ballast Lamp count LED item Mark shown in the manufacturer's matrix
Lutron NTSTV-DV Philips Advance IZT-2S26-M5-BS 1 82854 Green
Lutron NTSTV-DV Philips Advance IZT-2S26-M5-BS 2 82854 Red

The difference between a rating and a supported combination

The two entries give a specific reason to retain the lamp count when reading the record. In a PDF extraction, both colors can become identical printed dots, losing the distinction. Use the original displayed matrix, with its headings and status convention, when making the selection.

A control label such as 0–10V is another field to interpret within the complete product arrangement. It does not identify where every control connection belongs or approve a universal retrofit. The actual combination and applicable instructions determine the required scope.

A matrix-reading diagram keeps the lamp, ballast, dimmer and lamp count in one selection.
Changing the lamp count changes the row being read.

Follow one vertical-lamp selection through the records

Use the one-lamp row and the required light direction

For an illustrative selection, assume the recorded brief calls for a vertical operating position, one lamp per named ballast and the NTSTV-DV dimmer with the IZT-2S26-M5-BS ballast. These are example project inputs, not a VST installation record.

Start with position. Of the two 9.5W products discussed above, 82854 is the vertical candidate and 82853 serves the horizontal role. Next, locate the exact dimmer and ballast group, select its one-lamp row and read the 82854 column. The green mark is the relevant manufacturer entry for that documented combination.

The outcome is a vertical candidate associated with the correct matrix row. An actual order still needs the base, body envelope and applicable current instructions to match the fitting, including resolution of any conflicting base description.

Reject the unsupported change to the brief

Now change the assumed brief to two lamps on that ballast while retaining the other names. The next row shows a red entry for 82854. The one-lamp result cannot be carried across to this changed arrangement.

That is a useful stopping point in selection: retain the one-lamp brief only where it is the actual arrangement, or look for a supported alternative for the two-lamp requirement. Choosing the same lamp on the strength of its wattage would have missed the difference. No site rewiring or experimental trial is needed to understand why the original record no longer answers the changed question.

Compare brightness and power on a fair basis

Delivered light in the fitting

Compare the light reaching the required area with the selected lamp in its host. Lamp lumens help screen sources, while the reflector, cover and operating position affect the completed result. Keep those relationships visible when discussing whether a replacement is adequate.

Color temperature and the desired appearance should also stay consistent across the comparison. Otherwise, a change in perceived appearance can be confused with a change in useful light.

Lamp watts and retained ballast consumption

For a retained-ballast route, include the operating equipment in any system power comparison. The Halco sheet's Type A efficacy note excludes ballast consumption. Using only that lamp figure would leave part of the actual input outside an energy estimate.

If complete system input is unavailable, use the lamp rating for its stated purpose and leave running-cost calculations pending. A purchasing decision can still compare fit, route and control support without attaching an unsupported annual saving.

A recessed fitting shows the aperture and surrounding ceiling surface.
The fitting determines how the source light reaches the room.

When a complete downlight makes more sense

The cutout, trim and ceiling detail

A complete fitting becomes relevant where the old host is unsuitable or the required lighting function has changed. Compare the ceiling opening, available depth, trim coverage and mounting arrangement with the proposed light. A shared nominal opening description is only part of that fit.

Host constraint Lamp-level replacement Complete fitting What changes
Useful host and supported gear Retains the existing optical assembly May add unnecessary scope Amount of work and retained condition
Inadequate body or optical space Limits suitable lamp choices Offers another optical/body arrangement Cutout, depth and trim need comparison
Required control arrangement unsupported Needs another supported combination Can be selected around a new defined control brief Complete control and service arrangement

A fixture update with a defined service unit

VST's commercial recessed downlights are a relevant next category when the decision is to source a complete fitting. They are not presented as universal plug-in CFL replacements. The particular product and ceiling detail still determine the fit.

Choose a conversion route for the fitting you have

Retain a suitable lamp-level replacement

Choose this route when the actual base, operating method, optical position and required controls align with a supported product. It preserves the useful host and keeps the change limited to a clearly defined replacement unit.

Arrangement established Conditional route Reason Remaining selection item
Suitable screw-base host Applicable screw-base LED Straightforward lamp-level choice Envelope, supply and control conditions
Pin-base fitting with complete supported combination Specified LED lamp Retains useful host and gear Base and mechanical match
Existing arrangement outside available support Defined conversion or complete fitting Resolves the unsupported arrangement Exact scope and building interfaces
New product with a dedicated light engine Integrated development Designs around the host Supply responsibilities and finished assembly

Develop or replace the assembly when needed

For a product company changing the host itself, integrated light development provides a different path from buying a replacement lamp. Define the supplied assembly around that development task.

For maintenance, finish with an identifiable replacement route for each fitting group. The order should follow the base, position and complete operating combination established from the records, rather than a broad request to replace CFLs with LEDs.

A pin-base lamp and a complete downlight represent different replacement units.
A complete fitting changes more than the lamp.

FAQ

Frequently Asked Questions

Can I use an LED in a screw-base CFL socket?

A suitable screw-base LED can be considered when its base, supply requirements, physical envelope, enclosed-use conditions and controls match the fitting. Start with the actual lamp and host rather than assuming that every similar bulb shape has the same requirements.

Can I replace a two-pin CFL with a four-pin LED?

Choose against the complete base and supported operating route. Pin count alone cannot establish a substitution. Altering pins or removing keys is not a way to turn a different lamp into a compatible replacement.

Does a 120–277V marking mean a plug-in LED can use direct mains power?

No. Read that marking together with the product’s operating type and instructions. A ballast-dependent product can have supply information associated with its supported system; the marking alone does not establish a direct-mains conversion route.

Why are horizontal and vertical LED replacements listed separately?

Their emitting surfaces are arranged for different positions in the fitting. Match the designed position to the reflector and aperture, then compare the body envelope. Equal wattage does not resolve those optical and mechanical differences.

Will a dimmable LED work with my existing CFL dimmer?

Use the complete applicable lamp, ballast, lamp-count and dimmer combination. The worked matrix example shows why even the number of lamps can change the manufacturer’s entry. A general dimmable label leaves that combination unresolved.

Does VST offer a ready-made replacement for every CFL base?

A ready-made replacement needs an identified model for the particular CFL base. VST’s commercial downlights and integrated-light development are different supply routes; neither establishes a plug-in replacement for every base.

Related Classifications

Resource Type

Ready to Source or Develop LED Lighting?

Whether you need standard fixtures for a project, custom OEM modules for product integration, or specialized components for manufacturing -- our team is ready to help.

Inquiry Now