50W compact body
VST-SH50W-C lists 6,500lm and a 145mm body height. Consider this lower-power point in the range when the required layout and ceiling conditions support it.
View Product Visible cylindrical fixtures
Surface mounted LED downlight options for ceilings without a recess
Keep the housing below the ceiling and choose the fixture around its mounting position, the light needed below it and the available electrical supply, including the fixing access needed at each position.
- Seven published 50W to 150W models
- 200mm diameter with model-specific body heights
- Documented beam and light-color options
- Surface fixing and control details for sample discussion
Product selection
Start with the mounting position
A solid ceiling avoids a recessed opening, but the fixture still needs suitable support, an electrical route and room for installation and service.
As a surface mounted LED downlight supplier, VST can compare its cylindrical models against your ceiling conditions. Consider mounting height, the illuminated task and normal viewing directions before selecting power. The range provides different outputs and body heights, with order-specific optics and controls. Assess the body size and distribution together at the proposed positions.
The fixing surface
Identify the ceiling material and available structural support. The fixture bracket and site fasteners must form a suitable attachment; a finished ceiling surface alone does not establish that support.
The light destination
State whether the fixture serves a desk area, merchandise, a public hall or another task. The proposed positions and required distribution matter alongside the selected power.
The supply and controls
Record the supply voltage and any existing dimming equipment. The selected driver version and control interface need to match the actual electrical system.
The visible body
Compare the fixture height and finish with the ceiling detail. Allow access to connections and fixing points as well as room for the visible body.
Working with VST
Support for the fixture and its installation context
VST is a surface mounted LED downlight manufacturer offering configuration selection, product information and samples for the proposed mounting location.
A defined model comparison
The seven published models provide a starting point for output and body-size comparison. VST can keep the chosen power, optic and driver version together in the product specification.
Layout discussion where it matters
VST can discuss photometric data and a DIALux-based layout using your room dimensions, task and proposed mounting positions. This supports optical selection before sampling.
A representative installed sample
A sample can test the visible body, mounting access and appearance at the intended position. It is particularly useful where a new cylindrical fixture changes the ceiling’s visual character.
Production identification
VST can identify the agreed power, light color and control version through labeling and packing. This helps keep externally similar fixtures separate when a project uses several configurations.
Product construction
Surface mounted downlight construction
What surface-mounted means here
The fixture housing remains below the ceiling and attaches through a mounting arrangement. It is different from a recessed downlight whose main body sits inside a ceiling cavity.
Product configurations
LED surface mount downlights in the published range
Compare the seven models below. VST, a surface mounted LED downlight OEM supplier, can discuss the required optic, driver and finish.
60W compact body
VST-SH60W-C increases published output to 7,800lm while retaining the 145mm height. Compare the lighting calculation rather than expecting body appearance to reveal the power.
Request This Configuration 
70W compact body
VST-SH70W-C lists 9,100lm from the same nominal compact height. The required optic and control version should be recorded with the model.
Request This Configuration 
80W body options
VST-SH80W-C publishes 10,400lm and 145/245mm body-height options. Settle the actual body choice before using its dimensions in the ceiling detail.
Request This Configuration 
100W taller body
VST-SH100W-C lists 13,000lm in a 245mm-high body. Check the visible projection below the ceiling and access around the selected fixing position.
Request This Configuration 
120W taller body
VST-SH120W-C provides a published 15,600lm output. It is a candidate for a calculated high-output layout, not a direct recommendation from room height alone.
Request This Configuration 
150W taller body
VST-SH150W-C is the highest-power published choice here at 19,500lm. Distribution, viewing comfort and supply suitability remain part of selecting the complete configuration.
Request This Configuration Configuration checks
Body and optical choices
Separate the installation requirement from the selected output.
Surface fixing
The cylindrical format can be selected for surface installation. The site fixing detail needs to suit the ceiling structure and chosen bracket.
Beam choices
Published options include 60°, 90° and 120° distributions. Use the selected optic’s data to assess coverage from the intended position.
Protection options
The model pages list IP54 and optional IP65 configurations. Specify the version for the actual exposure; do not assume identical protection across every order.
Housing finish
VST can discuss the housing finish with the project appearance. An agreed sample helps define the finish before it is repeated across visible ceiling positions.
Component details
Parts of the cylindrical downlight
The source, optic and bracket serve different functions.
Component detail
The SMD LED array
The light-source assembly supplies the fixture’s spectrum and output. The pictured source detail shows a grouped SMD array in one supported optical construction. Choose CCT and CRI for the ordered model and assess the result with the room’s actual surfaces. A close-up of an LED package cannot establish the complete fixture’s lumen output, operating temperature or color consistency without the applicable product data.
Component detail
The optical lens
The optical front directs the source output into the selected distribution. The molded lens construction shown is one visible optical arrangement within the supplied references. Match the complete front and beam option to the chosen fixture. Changing the optic changes how light reaches the task, so a product photograph or wattage alone cannot determine suitable spacing or the lighting result at the edges of the area.
Component detail
The mounting bracket
The rear bracket connects the fixture to an appropriate site fixing arrangement. Its fixing access and relationship to the cable entry need to be considered before the ceiling position is finalized. Use fasteners suited to the actual substrate and the installation instructions. The power cable is not a mechanical suspension, and a surface bracket should not be treated as an adjustable aiming joint unless that function is specified.
Video introduction
VST and customer introductions
Background for discussing the selected model.
VST’s company introduction
The company video provides background before you discuss the cylindrical downlight range. Use the product comparison and the intended ceiling positions to focus the next conversation. The video is not a mounting instruction or evidence that a particular fixture configuration meets your project’s lighting criteria.
Customer cooperation context
This customer introduction offers a general view of working with VST. For your own order, identify the sample decision and the product codes needed by the installation team. Keep those requirements separate from any assumptions about the customer’s product or project shown in the video.
Applications
Surface fixtures in commercial spaces
The mounting position and task guide the configuration.
Solid-ceiling office refurbishment
A surface fixture can provide a route where an office ceiling has no usable recess. Check structural fixing, the projected body height and screen-viewing positions before selecting the optic. VST can compare a suitable cylinder configuration and support a sample assessment at the proposed office mounting position.
Retail display halls
A showroom needs lighting that serves the merchandise and its presentation surfaces. Establish ceiling height, display locations and color-rendering requirements, including reflections from glossy objects. VST can discuss the relevant output and beam options and provide model data for developing the proposed arrangement across the display area.
Hotel atria
An atrium combines a high ceiling with reception, waiting and movement below it. Confirm the usable mounting positions, normal sightlines and the intended balance between these tasks. VST can help narrow the cylindrical models and discuss photometric information for the public-area lighting layout before a sample is selected.
Indoor production areas
Surface-mounted cylinders may suit appropriate indoor production spaces with a usable supporting ceiling. Check ambient conditions, electrical supply and access for installation away from moving equipment. VST can discuss the suitable model and protection option, with product information to assess the lighting task and proposed maintenance access.
Transport concourses
A concourse needs coordinated lighting across waiting positions and pedestrian routes under a tall structure. Establish the fixed mounting points, distribution needs and the destination’s project requirements. VST can compare the higher-output models and provide configuration-specific information for the layout and product selection, without assuming that power alone establishes coverage.
Your next step
Choose the fixture with the ceiling in view
Send the mounting height, room use and planned positions for your surface mounted LED downlight. VST can compare output, body size and controls against those details. Your surface mounted LED downlight supplier can also discuss a representative sample when fixing access or appearance remains unresolved.
Technical details
Published surface-mount model comparison
Compare the seven models and their shared published options.
| Model | Power | Output | Body dimension |
|---|---|---|---|
| VST-SH50W-C | 50W | 6,500 lm | D200 × H145 mm |
| VST-SH60W-C | 60W | 7,800 lm | D200 × H145 mm |
| VST-SH70W-C | 70W | 9,100 lm | D200 × H145 mm |
| VST-SH80W-C | 80W | 10,400 lm | D200 × H145 / H245 mm |
| VST-SH100W-C | 100W | 13,000 lm | D200 × H245 mm |
| VST-SH120W-C | 120W | 15,600 lm | D200 × H245 mm |
| VST-SH150W-C | 150W | 19,500 lm | D200 × H245 mm |
| Shared published parameter | Value |
|---|---|
| Input | AC180-240V, 50/60Hz |
| Beam choices | 60° /90° /120° |
| CRI options | 80 /90 /95 |
| Protection | IP54; IP65 optional |
Discuss CCT, CRI, beam, dimming, protection and finish for the selected model. Surface and suspended preparation need separate mounting details. Include body-height constraints in the surface mounted LED downlight specification. A finish or control choice does not automatically establish that every optical and protection combination is available.
VST’s surface mounted LED downlight factory process follows the selected source, optic, driver and body. Assembly and inspection retain that configuration through labeling and packing. Product-specific optical and electrical information supports the agreed checks. Keep different body heights and driver versions identifiable in the project schedule.
Use a qualified installer and isolate the supply. Check the ceiling substrate and fixing arrangement, secure the bracket, and provide the required connection and strain relief. Support the housing independently of its cable. Observe clearances and protection requirements, complete assembly before energizing and commission the selected controls.
Customer feedback
Comments on fixture supply
Customers describe sample and identification details.
Ordering and cooperation
Model-specific ordering questions
Commercial points for the published cylindrical range.
All seven current model pages list 100 pieces. Use that model-specific starting quantity and separate powers or configurations in the request. Sampling and project-specific supply conditions can be discussed in the quotation.
Yes. Identify whether you need to check fixing access, body size or the lighting result. VST can prepare the appropriate sample and discuss an agreed credit of its charge toward subsequent bulk supply.
These model pages estimate 20-30 days for bulk production. Obtain the actual schedule for the selected preparation and quantity. Configuration changes and transport need separate consideration; the published production period is not an arrival-date guarantee.
The pages list 3- and 5-year options. The quotation must identify the term for the ordered configuration. Do not apply the longer option automatically to every fixture, driver choice or operating condition in a mixed project.
Yes. VST supports private labels, custom packaging and housing-finish discussions. Supply artwork and the product-code mapping before finalizing preparation. Extensive product changes may incur tooling costs that need a separate agreement.
Send a short description and photos or video of the affected VST fixture. Replacement supply can be discussed separately or with a later shipment. Refunds, freight costs and unrelated damage are not automatically covered.
Product questions
Questions about the proposed installation
These surface mounted LED downlight questions cover fixing, supply and project evidence. Use the actual ceiling conditions to settle the remaining preparation choices before selecting the sample or placing the fixture order.
| Surface preparation | Suspended preparation |
|---|---|
| Bracket attaches at ceiling position | A separate suspension arrangement lowers the fixture |
| Body height sets the visible projection | Drop length adds another positioning dimension |
| Connection access near the ceiling | Cable routing follows the suspension detail |
Do not assume so. The published range here lists AC180-240V at 50/60Hz. A 120V or 277V project needs a specifically supported electrical version rather than applying that range outside its limits. Provide the actual supply before selecting a driver or placing an order.
That cannot be decided from wattage. Compare the required distribution, light levels, glare conditions and mounting arrangement with the selected model’s data. A surface mounted LED downlight and another fixture type may place the same nominal power very differently across the working area.
Raise those functions as separate requirements. They are not established by the standard model comparison alone. The proposed accessory, driver, control logic and mounting arrangement need to form a supported configuration before the combination is offered as part of the supplied fixture.
No. The actual exposure may also involve condensation, corrosion, temperature or other conditions beyond an ingress rating. Describe the mounting location and environment so the configuration can be checked. An IP option is not evidence of suitability for every exterior or hazardous environment.