24V COB for cabinet recesses
An 8 mm white COB option for a cabinet light line. Test the chosen cover and setback on the proposed worktop.
View Product Whole-kitchen lighting plans
Select an LED Strip for Kitchen Lighting by Zone
Choose an LED strip for kitchen tasks, storage and atmosphere as part of one coordinated room.
- Separate worktop lighting from storage, display and decorative circuits.
- Compare representative products by the job each zone must perform.
- Coordinate white appearance and controls across the kitchen.
- Discuss complete assemblies for the actual mounting and cleaning conditions.
Start with the room
Give each kitchen zone a separate lighting task
An LED strip for kitchen lighting should be selected for the surface or space it serves. A useful room plan separates preparation, storage, display and background light before choosing individual models.
As a kitchen LED strip manufacturer, VST can translate the room layout into a zone schedule. Mark preparation areas, cupboard interiors, displays and evening accents, then decide which zones need independent adjustment. Select an LED strip for kitchen use against that schedule. Compare representative products below; resolve detailed worktop placement within the individual under-cabinet assembly.
Task and ambient circuits
Keep preparation lighting usable when ceiling coves or toe kicks are dimmed. Decide the circuit relationship before choosing controllers.
Coordinate the white appearance
Assess adjacent zones together. Matching a CCT label alone may not produce the same appearance on painted walls, timber and reflective glass.
Storage versus display
Inside a cupboard, visibility and door-triggered operation matter. A glass display also needs controlled reflections and suitable color rendering.
Different exposure conditions
A dry ceiling recess and a plinth cleaned near the floor need separate protection decisions. Evaluate each complete assembly in its intended location.
Cabinet integration
Coordinate product choices across the kitchen
Your kitchen LED strip supplier can connect the room-level lighting plan with model choices, sample assemblies and an organized supply schedule.
Zone-by-zone specification support
VST can discuss the different tasks across a kitchen, helping you select separate constructions where one strip would compromise another zone.
Color measurement capability
Integrating-sphere checks support sample evaluation of output, CCT and color rendering. Ask for results covering the selected configuration.
Prepared sets for the layout
Discuss lead preparation and labeling by lighting zone, so task, display and accent assemblies can be identified during installation.
Product changes documented
Record the light source and construction for production. Changing an emitter or cover may alter the appearance on polished stone.
A room-level selection
What an LED strip for kitchen lighting must deliver
Kitchen lighting combines several tasks. An LED strip for kitchen work surfaces, storage or atmosphere may need a different optical and control arrangement in each location.
Task light supports food preparation; cabinet-interior light reveals stored items; display light helps objects look right behind glass; toe-kick light outlines circulation; ceiling coves provide reflected ambient light. Select output, white appearance and protection for each purpose, then coordinate the zones. A fixed-white model suits a stable room scheme, while tunable white requires compatible controls and a defined adjustment range. COB can help with a continuous visible line in a shallow profile, but the final cover and viewing distance still need evaluation. The room plan determines where these choices add value.
Configuration options
Representative constructions for different kitchen zones
Use these kitchen LED strip factory options to explore different constructions. The selection guide below maps six practical tasks to representative SKUs and the checks needed for an assembled kitchen lighting system.
Narrow COB for shelf details
A 5 mm board where the recess limits width. Allow additional space for wiring and the actual protective construction.
View Product 
CCT COB for adjustable white
Consider adjustable white when the kitchen's light appearance must change with its other lighting. Use compatible CCT control.
View Product 
24V SMD for cabinet assemblies
A packaged-LED alternative for cabinet supply. Check emitter visibility through the profile cover and the selected sample's output.
View Product Useful design choices
Keep the room plan coherent
Coordinate task, storage and accent zones.
Light-quality selection
Published model data provides a starting point for CCT and CRI selection. Compare the relevant white option against food and cabinet finishes.
Room-level control planning
Independent task, storage and accent circuits let the kitchen change from preparation to evening use without dimming every zone together.
Identifiable zone connections
Prepared connections can follow the room schedule, making it easier to identify which assembly belongs to each lighting zone.
Project identification
Labels and packaging can be arranged around the cabinet program so different lengths are easier to identify when the installation team unpacks them.
Construction details
Components to select for each kitchen zone
Select components for the lighting task in each zone.
Component 1
White LED source
The white LED source influences the appearance of food, cabinet finishes and displayed objects. Select an LED strip for kitchen zones around the relevant CCT and color-rendering option: a display may justify a different specification from an indirect cove. Evaluate adjoining zones together at their intended levels. Where the published model offers alternative CRI values, identify the selected option explicitly instead of applying the highest figure to every supplied reel.
Component 2
Flexible PCB
The flexible PCB sets the board width available to a recess or profile. A narrow display edge, a ceiling cove and a plinth can have different space and support requirements, so check the physical route in each zone. Leave clearance for terminations as well as the strip. Where furniture opens or a panel must be removed, separate the circuit with a planned cable connection rather than pulling or sharply folding the board.
Component 3
White-light connection pads
Connection pads establish where a strip can receive prepared leads at its permitted cut positions. White and tunable-white constructions have different channel arrangements, so each zone needs the correct terminal map. Specify the termination around the chosen strip and any protective coating. Accessible, strain-relieved connections help a cupboard, display or cove remain serviceable without treating a similar-looking wire color as proof of electrical compatibility.
VST on video
View the category and working relationship
Company and cooperation perspectives.
See the lighting category
The VST strip overview introduces the category. Evaluate your chosen white option and assembled profile separately for the kitchen.
Hear about the cooperation
This customer perspective concerns cooperation with VST. Use your own cabinet sample to assess the proposed lighting assembly.
Application planning
Kitchen lighting from work surfaces to ceiling
Select an LED strip for kitchen zones by their lighting job. The examples cover preparation, interior storage, display, low-level accents and reflected ceiling light.
Under-cabinet worktops
An LED strip for kitchen worktops can put light in front of the person preparing food, reducing shadows from overhead illumination. Check the cabinet lip, worktop reflectance and eye-level view from nearby seating. VST can prepare a trial length for the intended profile so you assess placement before fixing the lighting across the complete kitchen.
Wall-cabinet interiors and glass displays
Interior lighting makes stored tableware easier to find and can turn a glass-front wall cabinet into a display. Check shelf shadows, glass reflections and whether the light operates with the door or independently. VST can discuss a suitable white option and prepared assembly that keeps the source screened while preserving access to the shelves.
Kitchen ceiling coves
LED strip lights for kitchen ceiling coves provide reflected ambient light above the fitted furniture. Establish the distance to the ceiling, interruptions from tall cabinets and how the cove will be cleaned. VST can help select a suitable white-light construction and examine a section drawing to place the light source away from direct view.
Island toe kicks
A low light line beneath a kitchen island can define its base during evening use without lighting the whole room. Consider shoe contact, floor cleaning and glare from polished tiles, then select an appropriately protected assembly. VST can support a plinth sample and a practical lead route through the island's service area.
Walk-in pantry shelving
In a walk-in pantry, shelf lighting can reveal stored items that a central ceiling source leaves shaded. Establish shelf depths, door-triggered or manual operation and access for cleaning. As a kitchen LED strip OEM supplier, VST can discuss repeated shelf assemblies and zone identification that fit the pantry layout and installation sequence.
Discuss the next step
Build a zone schedule for your kitchen
Share a room layout and identify the zones you want to light, their preferred white appearance and which should operate independently. A kitchen LED strip wholesale supplier proposal from VST can then separate the products and prepared assemblies needed for each task.
Technical information
Choose a product route for the lighting task
Choose an LED strip for kitchen use from the six routes below. Each SKU is a starting point for an assembled solution. Browse the complete LED strip collection for the wider model range.
| Selection task | Core checks | Representative SKU |
|---|---|---|
| Worktop task light | Output at the work surface, selected CRI, glare and reflections from the countertop. | S2835L140F1910 |
| Shallow cabinet profile | PCB width plus connector and cable clearance inside the complete profile. | C384W1005 |
| Continuous COB line | Normal viewing distance and diffuser depth; judge the completed line, not LED density alone. | C528W1308 |
| Adjustable white | Compatible CCT controller, warm/cool channel loads and permitted combined operation. | C600CCT1405 |
| Display cabinet | Appearance of displayed objects, glass reflections and heat in the enclosure. | C528W1410 |
| Damp / cleaning exposure | Complete protection construction, finished dimensions, cut ends, connectors and cleaning conditions. Base SKU is IP20; optional protection needs the specified finished assembly. | S2835L144W0608 |
For an LED strip for kitchen projects, VST can discuss prepared lengths, leads and identification by zone. Coordinate the selected white options across the room, while specifying protection separately for each exposure. New board or enclosure development needs an agreed engineering scope.
A kitchen program can identify each zone by strip model, white option, termination and prepared length. Production checks then follow the selected assemblies. Packing against the room schedule helps distinguish task, display and accent parts that may otherwise look similar.
- Confirm the lighting zones, switching plan and available supply locations before fit-out.
- Mock up representative task, display and ambient sections with their intended profiles.
- Install the appropriate supports and protection for each location.
- Keep power units and terminations accessible, including inside cupboards and ceiling recesses.
- Test the room in preparation, storage-access and evening settings before final trims close the installations.
Working together
Feedback on cabinet-lighting support
Helpful communication matters from the sample to the packed assembly.
Order planning
Planning a cabinet-lighting order
Record the applicable commercial terms in the order.
Samples are available for checking the fitted light line. Sample charges may be credited toward a later bulk order by agreement. For planning, LED strips generally start at 500 meters; prepared lengths and customization can affect the actual order basis.
Allow a typical 2–3 weeks of production for regular products. Light customization generally takes 3–4 weeks, while extensive changes may need 4–6 weeks. These ranges exclude transit and depend on materials, quantity and scheduling.
Yes. Private labeling and custom packaging can be discussed for the program. Establish the identification needed for each cabinet set. A substantial product redesign may require tooling, with its cost and terms quoted separately.
No. Choose the agreed model term: 2 or 3 years is usual for LED strips, while 5-year coverage is limited to selected products.
PayPal, Western Union and bank transfer are available for sample orders, paid 100% in advance. For bulk supply, the standard bank-transfer arrangement is 30% deposit followed by 70% before shipping.
A brief description and photos or video help VST examine a reported product-quality issue. Replacement parts may be shipped independently or included with a subsequent order, with the practical arrangement discussed after assessment.
Product questions
Resolve how the kitchen zones work together
Use these questions to coordinate an LED strip for kitchen installations across several lighting zones. They address switching, adjacent white-light appearances and system scope, beyond the local worktop positioning covered by a dedicated under-cabinet lighting design.
One product can serve more than one location when its light output, control and construction fit each task. That does not require all locations to share a circuit. Select products against the zone schedule before reducing the number of variants for purchasing convenience.
Group zones around how the room will be used.
Choose a control system that supports the required separation.
| Room setting | Control priority |
|---|---|
| Food preparation | Task lighting independently available |
| Finding stored items | Local cabinet or pantry operation |
| Evening use | Toe-kick or cove accents independently dimmed |
Use a coordinated white-light plan, which may use the same CCT or a deliberate difference. Assess adjoining sources together against the actual finishes. A toe kick used alone at night has a different role from a display that remains visible beside the preparation lighting.
It may, if the electrical design supports the total load, cable routes and required independent controls. Separate power distribution from switching behavior in the specification. A shared supply should not make it difficult to isolate a fault or service one concealed assembly.
List each zone and identify whether the scope covers strip only or also profiles, supplies, controls, leads and terminations. Record prepared lengths and white options against those zones. That lets you compare complete supply scope without assuming that every accessory shown in a concept image is included.