Slim edge detail
PR0811 provides a narrow section with a published 5.5mm strip clearance. Use its drawing to check the one-sided finishing relationship and available strip space.
Request This Configuration Plaster-in architectural details
LED drywall channel options for clean wall and ceiling lines
Choose an LED drywall channel around the finished opening, the construction behind it and the light direction you need, with matching parts and a sample to assess before the surrounding boardwork is finished.
- Straight, corner and formed-reveal sections
- Published model-specific strip clearances
- Matching cover and end-cap discussions
- Drawing-based samples before the finishing work begins
Product selection
Decide the section before closing the board
The visible slot is only part of the installation. The profile body, finishing flanges and cable route need space within the surrounding construction.
Send your section drawing to VST, an LED drywall channel supplier, to compare profiles with the boardwork and selected strip. Decide where light should emerge, how the cover remains accessible and where the feed enters before finishing conceals those choices. A short assembly sample can reveal a fit problem early.
The board and finish build-up
Show the layers surrounding the channel, including any backing or framing. The section drawing must fit that build-up without assuming a universal plasterboard thickness.
The light-slot position
Identify whether the line sits on a flat plane, an inside corner, an outside corner or within a reveal. Similar-looking profile widths can serve different orientations.
Access after finishing
Decide how the cover, strip and feed connection will be reached once the surface is painted. Do not rely on dismantling a finished wall to access an ordinary connection.
Working with VST
Work through the concealed details early
As an LED drywall channel manufacturer, VST can work from profile drawings to compare compatible parts and prepare samples for your construction.
Section comparison from a drawing
A wall or ceiling section lets VST examine the profile against the board edge and intended opening. This helps narrow the available shapes before a long cut list is prepared.
Matching the cover to the section
VST can discuss the correct diffuser material and finish for the profile. Evaluating them together avoids selecting a visually similar cover that does not engage the extrusion’s retention detail.
Cut-list preparation
Agree the required finished lengths, joints and end conditions. VST can discuss cutting and packing around that list so long profile sections reach the site with usable identification.
A sample for trade coordination
A short assembled section gives the lighting and finishing teams something physical to check. Use it to settle the light slot and access details before those teams work across the full area.
Product construction
A component in a finished assembly
What an LED drywall channel supplies
An LED channel for drywall provides mechanical and optical support for a lighting assembly. Its geometry relates the strip position and cover opening to the adjacent finished surfaces.
Product configurations
Choose by the finished section
Compare the section geometries below. As your LED drywall channel OEM supplier, VST can discuss cut lengths and matching parts for the selected profile.
Straight ceiling line
PR1414B places a compact light opening between finishing wings. Its published 10.5mm strip space is only one part of checking the complete prepared connection.
Request This Configuration 
Inside-corner detail
PR4614A has a formed corner section. Compare the drawing’s orientation with the meeting surfaces so the emitting opening faces the intended space.
Request This Configuration 
Outside-corner detail
PR5014 offers a different corner geometry from PR4614A. The two profiles should not be substituted merely because they accept similar strip widths.
Request This Configuration 
Deeper straight section
PR5319 provides a deeper compact opening within a wider flange arrangement. Check the cover seating and construction depth against the proposed ceiling detail.
Request This Configuration 
Perimeter reveal
PR8657 uses a larger formed cavity for a directional reveal. Its position and light path need to follow the section rather than a generic straight-channel installation.
Request This Configuration 
Curved wall-wash reveal
PR9158 provides a curved architectural section with a separate source position. Evaluate the intended wash with the selected strip and surrounding surface in a sample detail.
Request This Configuration Configuration checks
Fit and finishing details
Check the section together with its matching parts.
Section-specific clearance
Published strip space varies by profile. Include the actual board and connection height rather than selecting from the extrusion’s outside width alone.
Cover material options
PC and PMMA cover options are listed for the profiles. Material, finish and the selected section’s engagement detail must be considered together.
Finish coordination
VST can discuss anodized, powder-coated or painted finishes. Separate the visible finish from surfaces that become part of the plastered construction.
Identified long sections
Cut lengths and labels can be coordinated with packing. Clear identification helps keep straight runs, corners and end conditions in their intended locations.
Component details
Parts of the plaster-in assembly
The extrusion, cover and end cap need separate attention.
Component detail
The LED drywall extrusion
The extrusion establishes the light slot, the cavity available for the strip and the relationship to the surrounding board. Plaster-in wings have a different purpose from the strip mounting surface, even though they are part of the same section. Follow the relevant drawing when positioning the extrusion. Do not infer load-bearing capacity or a suitable board thickness simply from the amount of metal visible.
Component detail
The diffuser cover
The cover controls source visibility and closes the intended optical opening. Its profile must engage the selected aluminium section correctly, and the available space beneath it must accommodate the strip and termination. Compare clear, frosted, milky or opal options where listed for the model. The completed appearance depends on the source and depth as well as the cover, so assess those parts as an assembly.
Component detail
The end cap
An end cap closes the section at a run end and may provide a planned cable exit when the matching version supports it. It also contributes to the finished length and visible end condition. Specify it with the extrusion and cover so those details agree. An end cap with a hole does not by itself make a sealed cable entry or establish an outdoor protection rating.
Video introduction
Company and cooperation context
Introductions before the section and sample discussion.
VST company introduction
The company video introduces the supply partner behind the profile discussion. For this work, bring the section drawing and desired finished detail into the conversation. The introduction does not establish the installation method, board compatibility or performance of a particular plaster-in assembly.
A customer cooperation introduction
This customer video offers general context about cooperation with VST. The practical next step for a drywall lighting project is to identify who will assess the section sample and communicate the finishing detail, so any change reaches both the lighting and construction teams.
Applications
Architectural details for plaster-in light
The wall or ceiling junction determines the useful section.
Continuous ceiling light lines
A straight plaster-in line can become part of an office or commercial ceiling without a broad visible fixture flange. Check the board build-up, support positions and how the cover will be removed later. VST can compare the section drawing and prepare a short channel-and-cover sample for the intended ceiling detail.
Inside-corner reveals
An internal junction between finished surfaces needs a profile whose opening and wings follow that corner. Establish the surface angle, cable entry and direction of the light before the boards are closed. VST can help select the relevant corner section and a sample to check its relationship with both surfaces.
Outside-corner feature edges
An illuminated external edge can define a commercial feature wall or boxed architectural element. Confirm how the finishing surfaces meet, whether the opening is exposed to contact and where run ends terminate. VST can discuss the appropriate external-corner geometry and prepared parts for a representative construction sample.
Perimeter coves
A formed reveal can place a light source within the transition around a ceiling or wall perimeter. Check cavity depth, the reflected light path and access to the strip feed. VST can compare the relevant reveal section and discuss a sample using the proposed source and surface finish.
Feature-wall grazing
Directional reveal lighting can draw attention to a commercial wall finish, where distance and surface texture strongly affect the result. Establish the source position, sightlines and intended wash before specifying the run. VST can discuss the curved section and sample assembly so the lighting effect can be assessed on the actual material.
Your next step
Share a section of the finished detail
Send a section sketch, run lengths and construction stage. As your LED drywall channel supplier, VST can identify profiles and matching parts for a sample, then discuss preparation around the planned boardwork.
Technical details
LED drywall channel selection
Compare installation paths and follow the selected model for its full drawing.
| Section path | Example | Published strip clearance | Product data |
|---|---|---|---|
| Slim edge | PR0811 | Up to 5.5mm | PR0811 |
| Straight line | PR1414B | Up to 10.5mm | PR1414B |
| Inside corner | PR4614A | Up to 10.5mm | PR4614A |
| Outside corner | PR5014 | Up to 10.5mm | PR5014 |
| Deeper straight slot | PR5319 | Up to 10.6mm | PR5319 |
| Perimeter reveal | PR8657 | Up to 10.3mm | PR8657 |
| Curved reveal | PR9158 | Up to 12.7mm | PR9158 |
| Full datasheet | Provided for the selected SKU. Product links contain the published model data. | ||
Preparation can include cut lengths, supported finishes, matching covers, end caps and labels. Distinguish an LED drywall channel’s cut length from the assembled end-to-end requirement. Provide joint details before requesting a prepared set. A new section or extensive structural change may require development and tooling.
VST’s LED drywall channel factory coordination covers the extrusion, finish, cutting and matching parts. Inspection should preserve straightness and cover engagement after preparation. Marking and export packing follow the agreed cut list. Keep the extrusion model identified so a similar nominal width cannot substitute for different installation geometry.
Coordinate the approved profile and cable route with the qualified installation team before boarding. Fix the section to suitable construction and protect the opening during wet work. Keep compound clear of cover engagement and retain electrical access. After curing, install the specified lighting parts and cover according to their instructions.
Customer feedback
Feedback on profile projects
Comments on physical samples and prepared sections.
Ordering and cooperation
Ordering profile sections
Commercial questions about quantities, samples and preparation.
Aluminium profiles generally start at 300 meters. List quantities by section and finish; a total across unrelated profiles may have a different quotation basis. State prepared lengths and matching parts separately in the request.
Samples are available for the chosen section and matching parts. Explain the construction question to be checked. The sample charge may be credited against a subsequent bulk order by agreement, but credit is not automatic.
Yes, customization can be discussed from drawings. A new extrusion may require tooling charges, development and separate sampling. It is not a routine modification of an existing section, and tooling costs are not automatically refundable.
Allow typically 2-3 weeks for regular production, 3-4 weeks for light customization and 4-6 weeks for extensive changes. Finish, preparation, materials and order scheduling affect the agreed timing. These periods exclude transport.
Yes. Link each room or run number to its profile, cut length and matching parts. Agree that identification list before packing so one code cannot refer to different sections on the same project.
For samples, pay the full amount in advance using bank transfer, PayPal or Western Union. Bulk supply normally requires a 30% bank-transfer deposit, then 70% before shipment. Record any tooling charges or sample-credit terms with the quotation.
Product questions
Questions before closing the board
Resolve these LED drywall channel questions while the boardwork and feed route can still change. They address the construction choices remaining after a profile is shortlisted, before finishing conceals the installation detail.
| Detail | Why it is needed |
|---|---|
| Board and finish layers | Establishes the surrounding build-up |
| Available cavity | Checks body and feed clearance |
| Visible opening | Sets the finished light-slot intention |
| End and joint conditions | Defines how adjacent sections meet |
It depends on the section and the permitted building work. A plaster-in profile generally requires coordination with the board and finishing layers, so it is not automatically a surface-mounted retrofit. Share the current construction state before choosing a profile whose wings need to become concealed.
A cover arrangement may reduce visible breaks, but it does not correct misaligned extrusions or an unsuitable expansion detail. Joint positions, straightness, material movement and the chosen cover length need to be considered together. Do not promise an invisible continuous line from the cover alone.
That needs a construction-specific detail. An uninterrupted extrusion or finish can conflict with intended movement in the surrounding building elements. Identify the joint before preparing lengths and have the responsible design team establish how the lighting assembly should meet or stop at it.
No. The profile’s appearance and installation style do not establish the rating of the complete ceiling or wall. Fire, acoustic or other project requirements need evidence for the relevant construction. Raise them before choosing an LED drywall channel or cutting an opening in a rated assembly.