Channels for integrated lighting
LED Aluminium Profile Options for Integrated Lighting
Match the mounting geometry before choosing the visible light line. An LED aluminium profile supports the strip and cover, with different constructions for furniture, recessed ceilings and suspended lighting.
- Published cross-sections and strip-clearance data
- Surface, corner, recessed and suspended families
- Diffuser and finish choices by model
- Sample sections for checks with the actual strip assembly
Product selection
Start with the mounting surface
The outside shape determines how the channel meets the furniture or building. Internal space determines whether the strip, connection and cover can fit together.
As your LED aluminium profile supplier, VST can match an extrusion to the host structure and strip. The profile is passive; the strip and driver determine voltage, output and control. Compare mounting lips, usable clearance and cover engagement in a section drawing. A sample checks the actual connector, cable exit and removable cover where the assembly is tight.
Mounting geometry
Choose the installation method first. A surface channel, recessed lip and plaster-in flange meet the host in different ways.
Usable internal space
Include solder joints, connector height and the strip itself. Outer width does not describe the usable internal mounting space.
The visible cover
Choose the cover with the profile and strip. Clear, frosted and opal finishes change the visible result.
Access after completion
Plan how to replace the diffuser, strip and driver after furniture or plaster finishes restrict access.
Working with VST
Check the assembly before ordering lengths
VST is an LED aluminium profile manufacturer that can use your section drawing to check how the parts fit together.
Section drawings
VST can compare the section drawing with the mounting surface and strip, checking usable clearance separately from the profile’s outside dimensions.
A matched component set
Discuss profile, diffuser, end caps and fixings as one model-specific set so the components arriving for assembly fit together.
Finish coordination
Silver, black and white options use different finishing routes. Agree the treatment and sample appearance before releasing a larger production order.
Sample sections
A short sample reveals cover engagement and connection clearance that a perspective image can hide. Test it with the actual strip.
Long-product packing
Protective packing and shipment coordination can be discussed around the cut schedule. Pack length must suit transport, handling and storage.
Understand the construction
A channel, cover and mounting interface
An LED aluminium profile is a mechanical part of the lighting system.
An LED aluminium profile supports the strip, cover and accessories. Its cross-section determines how it fits the furniture or building and where the light emerges. The strip and driver determine electrical and lighting performance. Check the mounting geometry, connection space and end treatment with a sample assembly. Waterproofing, structural capacity and walk-over suitability require evidence for that assembly and installation.
Product configurations
Six different ways to integrate a light line
VST, your LED aluminum profile supplier, offers these mounting geometries. Choose the construction first, then compare dimensions.
Configuration details
Section dimensions and component fit
The cut section, finish and cover all affect the finished installation.
Section clearance
Compare the published section and usable strip width. Include the connector and cover engagement when testing the actual assembly.
Finish options
Choose the surface treatment and silver, black or white finish by model. Use the approved sample as the appearance reference.
Length planning
Plan joints, end caps and transport from the cut schedule. Finished assembly length can differ from the ordered extrusion length.
Cover engagement
Retaining geometry determines fit. Equal nominal widths do not establish that a separately sourced cover will engage with the channel.
Inside the construction
The parts of the channel assembly
Match the extrusion and cover; use a plaster-in flange where the installation requires it.
Component detail
Aluminium extrusion
The extrusion supports the strip and defines the cross-section and mounting interface. Compare its retaining lips and mounting geometry with the opening and actual assembly. An LED aluminium profile has no universal watts-per-meter capacity: thermal performance depends on the strip and installation conditions.
Component detail
Diffuser cover
The cover affects light transmission and the visibility of individual sources. Available finishes include clear, frosted, milky and opal, with materials selected by model. Match its retaining edges to the channel. Check the sample with the actual strip at the intended viewing distance, since opal covers can produce different results.
Component detail
Plaster-in flange
A plaster-in flange connects the channel to the surrounding finish while retaining access to the light opening. Its perforations and geometry belong to the selected plaster-in model. Position the section before finishing the surface and protect the slot during the work. Ordinary surface channels use a different mounting arrangement.
Video introduction
Engineering support and communication
The company and customer videos introduce VST’s business and working relationships.
VST engineering and supply support
The company video introduces VST’s lighting business. Ask about the sample assembly and supply support for your chosen profile section.
Working through order details
The customer video describes working with VST. For your profile order, discuss sample feedback, finish choices and packing requirements.
Applications
Match the section to the installation
Each construction needs its own fixing and service approach.
Suspended office lines
Suspended office lighting needs a profile that accommodates the light direction and a workable suspension arrangement. Check ceiling supports, strip width, driver placement and service access. VST can compare single- or double-sided sections and provide a sample assembly for the intended light source and cover.
Furniture channels
A cabinet or shelf can integrate a compact channel with a protected light opening. Measure the available cavity and the space for end caps, leads and diffuser removal. VST can suggest a surface or recessed LED aluminium profile and supply a sample to check against the furniture construction.
Plaster-in reveals
A continuous ceiling reveal needs the channel to meet cleanly at the light opening. Establish substrate thickness, mounting position and the method for protecting the diffuser slot during plastering. VST can provide a plaster-in section drawing and sample for coordination with the ceiling team’s installation method.
Corner displays
A corner section can direct light toward merchandise from a shelf corner. Check the angle, visible glare, strip clearance and how the cover will be removed later. VST can compare the relevant corner profiles and supply a sample set for the actual shelf depth and finish.
Stair guidance
A stair section can position a protected light line along the step edge or riser. Review the tread detail, fixing method, cable route and required mechanical suitability for the site. VST can identify a stair-profile candidate and its drawing; load and installation requirements need project-specific confirmation.
Your next step
Speak to an LED aluminium profile supplier
Send VST the mounting detail, strip width and quantity. We can shortlist a section and quote matching sample parts.
Technical details
Published sections and assembly details
Compare the published section dimensions and strip clearances by model.
| Selection path | Choose it for | Check before ordering | Product specifications |
|---|---|---|---|
| Surface | A channel fixed onto furniture or another surface | Fixing access and strip connection space | SU1712 |
| Corner | Light directed from a shelf or display corner | Light direction, glare and cover removal | SC1616A |
| Recessed | A channel set into a prepared opening | Opening dimensions and fixing clearance | RS5035A |
| Plaster-in | A light line integrated with plaster finishes | Flange position and protection during plastering | PR1414B |
| Suspended | A hanging linear assembly | Supports, light direction and driver access | SPD4045 |
| Large-section | A wider linear lighting assembly | Section dimensions, mounting and internal clearance | SPA10075A |
| Full data | These are representative selection paths. Open a product link for model specifications, or browse the full range. Full datasheets are provided for the selected SKU. Section dimensions and strip clearance depend on that SKU. | ||
Discuss cut lengths, finishes, covers, end caps and cable exits for the chosen section. A new cross-section requires separate engineering and tooling. Approve its assembly sample before production.
VST’s LED aluminium profile factory follows the approved section and finish. Agree dimensional, surface and accessory-fit checks, with packing that protects cut ends and covers during transport.
Check the substrate and fixings. Dry-fit the strip, connection and cover, then plan cable exits and deburr cuts. Protect the slot during finishing. Install electrical components to their own supply and wiring instructions.
Customer feedback
Feedback on profile sampling and supply
Sample fit, matched parts and packing matter in everyday cooperation.
Ordering and cooperation
Profile orders and customization
Section, finish and cut requirements define the commercial scope.
The general minimum starts at 300 meters. Section, finish, cutting and tooling affect the actual order quantity, which VST will state for the selected profile and accessories.
Yes. Test a sample with the actual strip and connector. Specify its cover and accessories, and agree any sample charge and later order credit before preparation.
Drawing-based customization is supported. A new extrusion section can require engineering, sampling and tooling charges. Establish the geometry and assembly requirements first; a finish change has a different scope from new tooling.
Allow approximately 3 to 4 production weeks for light customization, or 4 to 6 for extensive changes. Regular profiles typically take 2 to 3 weeks. Scope and materials affect timing; approvals and transport are additional.
Yes. Provide the identifiers, carton marks and handling requirements. Packaging should protect the finish and diffuser while keeping different sections distinguishable during receiving and assembly.
Bulk profile orders use bank transfer: 30% deposit, then 70% before shipment. Samples are prepaid in full using bank transfer, PayPal or Western Union.
Product questions
Section fit and installation limits
Small differences in a section can affect assembly fit. Check the cover, thermal conditions and installation limits before approving the profile and strip combination.
| Length to state | What it covers |
|---|---|
| Extrusion | Cut metal section |
| Diffuser | Cover with its required end allowance |
| Complete assembly | Profile, end caps and connection clearance |
Matching width is not enough. Retaining lips, edge thickness, curvature and insertion method must also match. Test the chosen cover on the actual section.
Strip power, contact, ambient conditions and enclosure determine temperature. Assess the complete assembly before assigning a watts-per-meter rating to an LED aluminium profile.
Use a documented bendable construction with a specified direction and radius. Bending an ordinary straight extrusion can distort the channel or prevent its cover fitting.
No. Obtain evidence for the actual load, cover, fixing and substrate. A family name or step rendering cannot establish suitability for foot traffic.