15W SR05: compact fixed optics
Start here for a smaller permanent display. Specify the required control option separately from its fixed-beam choice.
View Product Control system selection
Dimmable LED track lights matched to your control system
Specify a compatible driver, controller and rail before evaluating the dimming.
- TRIAC, 1-10V and DALI options
- Fixed and zoom optics across the range
- Track interfaces and dimensions listed by model
- VST help with product options and sample trials
Begin with the controller
Choose lighting for the scenes you need
Choose dimmable LED track lights for the scenes you plan to use. Identify the controller and required behavior at low light levels before settling on the head's appearance.
A restaurant may need a steady evening setting, while a retail window may change brightness after closing. As your dimmable LED track light supplier, VST can suggest a driver option and a sample to try with your equipment. Provide the rail and controller models where known, and describe how you need the lighting to operate.
State the lowest useful level
Describe the scene you need and the acceptable behavior when dimming down, switching on and returning from a power interruption.
Identify the installed controls
Supply the controller maker and model, plus the intended load. An interface name alone does not establish complete operating compatibility.
Separate optics from dimming
Beam-width adjustment and electrical dimming do different jobs. Specify each independently so a zoomable head is not mistaken for a dimmable configuration.
Control coordination
Choose a driver option for your trial
As a dimmable LED track light manufacturer, VST can assess your chosen control method with the head model and its electrical connections.
Driver details on the order
Record the driver option with the selected head. VST can include the control method in both the sample specification and the order.
Test the scenes you need
Describe your controller and operating scenes before the trial. This lets the sample evaluation address the settings you will use, including the lowest light level.
Electrical engineering support
VST's engineers can assess control and connection requirements, identifying which are covered by published options and which need further development.
Production consistency
Keep the accepted electrical specification in the order record. Inspection requirements can then be tied to the version tested and selected.
Control choices
What dimmable LED track lights require
Dimmable LED track lights need a suitable driver and compatible control system. State the control option when ordering the head, as a non-dimmable version is a separate choice.
TRIAC requires compatible phase control. A 1-10V driver needs the appropriate analog control connection, while DALI uses digital lighting control. Each has its own wiring and commissioning requirements. Power circuits in the track do not establish a control connection. Match the adapter and wiring to the system, then test the sample across the intended operating range. A listed DALI option alone establishes neither DALI-2 certification nor a minimum dimming level.
Sample starting points
Match the head with its dimming option
Order dimmable LED track lights by choosing a model and specifying its listed control option.
20W SR08: adjustable display coverage
A compact zoomable model for changing displays. Specify the adapter and control connection when ordering the sample.
View Product 
30W SR09: changing retail zones
Consider this zoom model where display width changes. Its optical adjustment remains independent of the selected dimming interface.
View Product 
40W SR05: larger fixed displays
Consider this fixed-optic model for a larger display, after assessing the layout and intended controls.
View Product Configuration details
Keep visible and electrical choices clear
Keep the optical and appearance choices with the electrical specification.
Independent beam selection
Fixed and zoom optics remain separate choices from the dimming method. Record both when a scene needs brightness and coverage adjustments.
Selected light color
The CCT options specify the selected light source. Brightness dimming alone does not provide tunable-white or dim-to-warm operation.
Interior operating conditions
The range is listed as IP20. Keep the lighting and its control equipment within the environmental conditions specified for each supplied component.
Configuration labels
As a dimmable LED track light OEM supplier, VST supports labels identifying the agreed model and electrical version throughout the shipment.
Component roles
How the source, adapter and optic work
Each component has a separate job in the controlled lighting system.
Light source
COB sources in dimmable LED track lights
The COB source determines the head's underlying color characteristics. Check the displayed objects at the lighting scenes you intend to use, including the lowest setting. Specify color tuning or a shift toward warmer light as separate requirements if the project needs them. Evaluate the actual combination of source, driver and controller for that behavior before choosing it for the order.
Connection interface
Track adapter
The adapter must fit the rail mechanically and provide the right electrical connections. Published models use different track interfaces, so heads with similar housings may not be interchangeable. Identify how any required control signal reaches the driver. Follow the connection drawing for the complete system when installing it. The visible number of power circuits cannot establish whether the rail and head support DALI or analog control.
Adjustable coverage
Zoom lens
Zoom adjusts beam width independently of electrical dimming. A display may need both variable coverage and different brightness scenes. Set the beam for the object first, then evaluate the light level at that setting. Adjusting zoom after commissioning can change the brightness across the display. Record its position with the scene settings when you need to reproduce the same presentation later.
VST in video
VST and the working relationship
Start with the company introduction and a view of cooperation.
Company introduction
Get to know VST through the company introduction before discussing controls. Use it as background for questions about engineering communication and sample coordination while the team works with you to select an electrical configuration.
A view of ongoing cooperation
Hear a customer's perspective on cooperation with VST. Consider how technical questions and changes should be communicated on your own lighting project, then agree that process while discussing the dimmable sample and proposed order.
Applications
Scenes with changing light levels
Define the desired scene before choosing a control configuration.
Restaurants
Restaurants may need bright preparation periods and a lower evening scene around tables or wall decoration. Specify the required low level, controller and behavior when the lighting switches on. VST can propose a driver configuration for sample evaluation with that controller before it is extended to the full dining area.
Evening shop windows
An evening shop window needs merchandise to remain visible as the surrounding street light changes. Check the intended operating schedule, reflections in glass and whether separate display zones need independent control. VST can help identify a dimmable build and the electrical information needed for the proposed window-control arrangement.
Museum display cases
Museum display cases can require carefully limited illumination for specific objects. Establish the permitted exposure and operating schedule with the collection specialist, along with the desired control behavior. VST can provide product and configuration information for the lighting assessment and arrange a sample of the proposed head for evaluation.
Hotel lounges
Hotel lounges use lighting scenes to support different times of day and patterns of occupancy. Identify the control platform, grouping requirements and how guests see the fixtures from seating areas. VST can assess the requested driver option and help define a sample trial for the lounge's intended operating scenes.
Event showrooms
Event showrooms may switch between product presentation and general visitor circulation settings. Describe which heads must operate together, the control equipment and the required response when a scene changes. VST can discuss suitable configurations and identify the information needed to evaluate the complete system before the event installation.
Control brief
Request dimmable LED track lights for your system
Send the controller model, rail details, wattages and quantities. VST can suggest an electrical configuration and identify the sample checks needed before preparing the project quotation.
Model range
Dimmable LED track lights: published model comparison
Specify the dimmable option when ordering; non-dimmable versions are also listed.
| Model | Power | Flux | Efficacy | Size | Beam | Track |
|---|---|---|---|---|---|---|
| VST-TL-15W-SR08 | 15W | 1500 lm | 100 lm/W | Ø55 × L125 mm | 15°–60° zoomable | 3-phase track (4-wire or 6-wire) |
| VST-TL-20W-SR08 | 20W | 2000 lm | 100 lm/W | Ø66 × L130 mm | 15°–60° zoomable | 3-phase track (4-wire or 6-wire) |
| VST-TL-30W-SR09 | 30W | 3000 lm | 100 lm/W | Ø77 × L150 mm | 15°–60° zoomable | 3-phase track (4-wire or 6-wire) |
| VST-TL-35W-SR09 | 35W | 3500 lm | 100 lm/W | Ø88 × L168 mm | 15°–60° zoomable | Single-phase track (3-wire) |
| VST-TL-40W-SR09 | 40W | 3600 lm | 90 lm/W | Ø99 × L185 mm | 15°–60° zoomable | 3-phase track (4-wire or 6-wire) |
| VST-TL-15W-SR05 | 15W | 1600 lm | 105 lm/W | Ø55 × L120 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| VST-TL-20W-SR05 | 20W | 2400 lm | 120 lm/W | Ø66 × L125 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| VST-TL-30W-SR05 | 30W | 3400 lm | 110 lm/W | Ø77 × L140 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| VST-TL-35W-SR05 | 35W | 4200 lm | 120 lm/W | Ø88 × L160 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| VST-TL-40W-SR05 | 40W | 4600 lm | 115 lm/W | Ø99 × L160 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| VST-TL-50W-SR05 | 50W | 5500 lm | 110 lm/W | Ø113 × L170 mm | 15° / 24° / 36° / 60° optional | 3-phase track (4-wire) |
| Shared specification | Published value |
|---|---|
| Input Voltage | AC200–240V 50/60Hz |
| Power Factor | >0.9 |
| Light Source Type | COB |
| Color Temperature | 2700K–7000K |
| Color Rendering Index (CRI) | 80 / 90 / 97 |
| UGR | ≤15 |
| Dimming Option | Non-dimmable / 1–10V / TRIAC / DALI |
| Housing Finish / Color | White / Black |
| Reflector Color | White / Black / Silver / Mirror |
| IP Rating | IP20 |
| Working Temperature | -20°C to +50°C |
| Work Humidity | 10%–90% RH |
| Warranty | Min. 3 Years |
VST can assess the requested controls alongside labeling and packing as your dimmable LED track light OEM supplier. Additional electrical functions need an engineering assessment. The quotation should identify any development work or tooling required for extensive changes.
Include the agreed driver and connections in the production specification. VST can use these details to define inspection requirements. State the functional checks needed, particularly if a driver change would affect a control system that has already been evaluated.
A qualified installer should isolate power and follow the matched rail, driver and controller instructions. Verify the power and control connections before energizing. Commission the intended groups and scenes, then assess switch-on, low-level behavior and recovery after a power interruption on the installed system.
Working together
Feedback on technical cooperation
Customers share their experience of the working process.
Order terms
Move from the control trial to an order
Record the selected electrical build with its commercial conditions.
All 11 published models in the comparison list an MOQ of 100 pieces. Give quantities for each model and control option. VST will state any different minimum for custom electrical requirements or packaging when quoting the order.
Yes. VST can quote a sample for your control-system trial as a dimmable LED track light supplier. Provide the controller details and the behavior you need to test. Agree with VST whether the sample charge can be credited against a later bulk order.
Standard-model listings indicate 7 days for a sample and a bulk production estimate of 15 to 25 days. A different driver or additional function needs its own schedule assessment. Use the quotation's agreed dates and allow for transport separately.
The range lists a minimum 3-year warranty. Ask for the quoted product's conditions and specify which control equipment is included. Contact VST about product quality problems with a short description and photos or video so the team can discuss replacement support.
Pay the complete sample charge in advance through PayPal, Western Union or a bank transfer. Bulk supply requires a 30% bank-transfer deposit, followed by 70% before dispatch. The quotation should identify any development charge separately.
Operating questions
Before ordering dimmable LED track lights
Before ordering, check low-level operation and how the heads behave together. Specify any additional functions separately from brightness control. The answers below explain what evidence is needed beyond the control interface's name.
Record observable behavior at the intended operating settings.
| Trial | Record |
|---|---|
| Dim downward | Lowest stable useful level |
| Switch on at low setting | Starting behavior |
| Operate the intended load | Consistency across heads |
| Interrupt power | Return state |
Flicker performance has not been established for a specific dimmed version here. If visual comfort, camera use or measured flicker limits matter, state the test conditions and acceptance criteria. Any supporting results must identify the driver, controller and operating level tested.
Brightness dimming alone does not establish tunable-white or dim-to-warm operation. Those functions need a suitable source, driver and controls. Describe the color behavior you want so VST can assess it separately from standard brightness adjustment.
Check the controller limits and selected drivers before putting the heads on one controller. The number of heads, their load characteristics and the control arrangement can affect operation. Test the intended combination at the low end as well as normal settings; a single-head test is insufficient.