24V single-color strip
C320W1008: 8mm PCB and 50mm cutting for compact white-light details.
View Product Continuous light in compact spaces
COB LED Strip Choices for Furniture and Architectural Details
Bring a continuous light line into a shelf, channel or recessed detail. Select the COB LED strip by its voltage and color-control type, then match the width, cutting interval and power to the installation.
- Published white, CCT, RGB and multichannel choices
- Narrow and wider PCB configurations by model
- Lead, connector and reel-label customization
- Samples for the actual channel and viewing distance
Product selection
Choose the light effect and electrical format together
The continuous emitting surface can reduce the visible point pattern in close-view details. The finished appearance still depends on the channel, cover and viewing distance.
VST is a COB LED strip supplier with thirty-two published low-voltage models. Single-color, CCT, RGB, RGBW, RGBCCT and addressable reels need different supplies and controls. Choose the effect and channel space, then compare width, cutting intervals and power. Discuss prepared leads and packaging with VST so the selected strip arrives ready for the agreed assembly work.
Continuous appearance
View a sample in the intended channel and cover. A smooth bare emitting line does not guarantee the same result through every diffuser or reflective surface.
Supply and controls
Choose voltage and control type as one configuration. White dimming, tunable white, multichannel color and addressable effects require different connections.
Usable section lengths
The marked cutting interval sets the available finished lengths. Include pads, connectors and cable exits when planning a short furniture or display section.
Working with VST
Strip preparation for repeat assembly
VST is a COB LED strip manufacturer that can prepare the circuit, connection and reel identification for your assembly.
Support for tight installation spaces
VST can help with the electrical and structural details of the strip, channel and wiring when a tight cavity makes installation from a standard reel difficult.
Color and output checks
Integrating-sphere measurements support model-specific comparisons of output, CCT and CRI. Request the sample data and market documents relevant to your selected configuration.
Prepared connection details
Specify lead length and connection type with the voltage and control channels. VST can discuss which connections can be prepared before delivery to simplify assembly.
Order identification
Reel labels and packaging distinguish voltages, colors and control types that look similar when unlit. Match those identifiers to the accepted sample.
Understand the construction
What the COB surface changes
A continuous emitting surface can use several control circuits.
A COB LED strip places closely spaced sources beneath a continuous encapsulated emitting surface, helping reduce visible points in a narrow light line. Electrical designs still differ: single color, tunable white and digital color need different circuits and controls. Compare the complete model’s width, cutting and power, then view its light through the actual cover. A protective coating also changes the assembly and termination work. The visible line alone cannot determine which supply, controller or connection to order.
Product configurations
Choose a control format
As a COB LED strip OEM supplier, VST offers the configurations below. Use the Datasheet selection guide, then open a product page for full model specifications.
Color and tunable white
C840RGBCCT2112: multichannel control for changing color and white tone.
View Product 
Configuration details
Light appearance and circuit details
Check the visible light line, cut points and connections in the intended channel.
Continuous emitting line
The encapsulated light-source surface helps produce a smooth visible line. The final diffuser and mounting position still shape what you see.
Defined cut points
Model-specific intervals divide the strip into usable sections. Keeping a complete section preserves the intended circuit and connection pads.
Control choices
White, color and addressable models support different effects. Choose the channel structure before ordering the controller and prepared leads.
Contact with the channel
A suitable mounting surface supports the strip and its thermal path. The adhesive, protective layer and channel must work together.
Inside the construction
The layers and contacts behind the light line
Check the source layer, board and pads against the installation space and circuit.
Component detail
COB light-source layer
The encapsulated source layer creates the continuous emitting line. Its phosphor and LEDs affect color and output, while the cover changes transmission and appearance. Compare the ordered CCT and color-rendering option against the real finish. A COB LED strip photo cannot establish the result beside reflective stone, glass or shelving.
Component detail
Flexible PCB
The flexible PCB carries the circuit and defines the width and cutting sections. Those sections limit the finished lengths available for a cabinet or profile. Support the board without sharp creases, especially near joints. Feed positions and cable routing must suit the selected voltage, power and installed section lengths.
Component detail
Connection pads
The connection pads must match the selected white, multichannel or digital circuit. Leave room for the termination and cable strain relief inside the host. A connector chosen only by PCB width can miss the contact pattern or obstruct the cover; test the actual interface before approving a prepared strip.
Video introduction
Strip-light work and customer cooperation
The videos introduce VST’s LED strip work and a customer’s experience of the company.
VST strip-light supply
The video introduces VST’s LED strip work. Use the selected model data to discuss your channel and controls, and decide what the sample needs to demonstrate.
Communication through sampling
The customer video describes cooperation with VST. Agree which connection, appearance or assembly question your sample needs to answer before production.
Applications
Where a continuous light line helps
The host detail determines the width, feed and visible result.
Furniture niches
A shallow furniture niche can use a continuous line without making individual light points prominent. Check channel depth, visible viewing angles and space for the feed wires. VST can compare suitable PCB widths and prepare a COB LED strip sample to assess with the actual finish, cover and displayed objects.
Architectural coves
A ceiling cove spreads indirect light across a broad surface, making feed planning important along long runs. Establish section lengths, supply locations and the required white tone before choosing power. VST can discuss the relevant strip and wiring approach, with a sample section to compare the cove geometry and reflected appearance.
Mirror perimeters
A mirror perimeter needs an even-looking halo with enough space behind the frame for the light and wiring. Check the installation environment, bend direction, thermal contact and clearance from the wall. VST can suggest a suitable configuration and lead arrangement for a prototype of the complete mirror assembly.
Glass showcases
A showcase puts both merchandise and the light source close to the viewer. Compare color rendering, reflections in the glass and the space inside the frame. VST can supply a model-specific sample for the chosen profile, helping you judge the object’s appearance without assuming that a bare-strip photo represents the finished case.
Counter accent lines
A curved counter can use a concealed strip to outline its fascia without a bulky visible fixture. Check the supported bend direction, curve radius, protective cover and access to each feed. VST can discuss strip preparation and connection positions so the sample follows the actual counter construction.
Your next step
Specify the line you want to build
Ask VST, a COB LED strip supplier, for a sample proposal. Tell us the effect, run length and quantity, with a channel photo and any selected supply or controller.
Technical details
COB model data and preparation
Compare electrical and dimensional values within each control family.
| Selection path | Choose it for | Check before ordering | Product specifications |
|---|---|---|---|
| Single color | One fixed white tone or color | Supply voltage, output and cutting interval | C320W1008 |
| CCT | Adjustable white tone | White-tone range and matching control channels | C640CCT1610 |
| RGB | Color effects across a connected section | RGB controller, power and feed positions | C576RGB1008 |
| RGBW | Color effects with a separate white output | White-light requirements and controller channels | C784RGBW1912 |
| Addressable | Programmed or segmented color effects | Data protocol, controller and power feeds | C720RGBD2110 |
| Full data | These are representative selection paths. Open a product link for model specifications, or browse the full range. Full datasheets are provided for the selected SKU. Electrical values, cutting intervals and control requirements depend on that SKU. | ||
Specify the chosen model’s CCT or color, leads, connectors, prepared lengths, protective construction and packaging. New electrical or physical designs require a separate development scope.
VST’s COB LED strip factory follows the selected source and circuit design. Electrical, output, color, aging and visual checks support consistency through lead preparation and packing.
Disconnect power. Cut only at marked positions, match the low-voltage supply and controller, and mount without sharp folds. Protect terminations and keep the supply accessible. Test sections before closing the channel.
Customer feedback
Comments from strip projects
Customers share what made sampling and assembly easier.
Ordering and cooperation
COB strip supply questions
Agree the model and preparation scope before placing the order.
Samples are available for the selected strip and channel. Agree on the configuration, charge and any credit against a later bulk order before preparation.
LED strips generally start at 500 meters. Model, prepared lengths, connector work and packing can change the final minimum. VST will state the quantity applicable to the chosen COB configuration in its quotation.
Yes. Private labels and packaging can identify model, voltage, color and batch details for assembly. Extensive electrical or structural changes and tooling are assessed separately from ordinary reel labels and cartons.
Regular production normally needs 2 to 3 weeks. Light customization takes about 3 to 4 weeks; extensive development, 4 to 6 weeks. Scope and materials affect timing. Allow additional time for approvals and transport.
No. Strip coverage is generally two or three years, with five years limited to selected products. Use the chosen model’s published term and final quotation. Another product’s warranty does not apply automatically.
Send the model, order reference and a brief issue description with photos or video. After assessment, VST can discuss replacement material sent separately or included with a later shipment.
Product questions
Power, cutting and control questions
When dividing a reel into installed sections, plan the cut lengths and feeds together. Match the control channels and protect each connection.
| Effect | Format to compare |
|---|---|
| One fixed white or color | Single-color model |
| Adjustable white tone | CCT model and matching channels |
| Color with a separate white output | RGBW or RGBCCT |
| Moving or segmented effects | Addressable model and compatible protocol |
Reel length does not define the feed arrangement. The strip circuit, cable resistance and operating load determine voltage drop. Agree on the model’s permitted run and feed points before using a long COB LED strip reel as one continuous installation.
Use complete cutting sections and allow space for leads and end caps. An unmarked cut can leave an unusable end. Prepared lengths must follow the chosen model’s interval.
RGB mixes colors; RGBW and RGBCCT have a separate white function. Select the controller for the required scenes, and sample the COB LED strip in the white mode intended for useful illumination.
No. Cuts, leads and connectors need suitable sealing for the actual exposure. A coated reel alone does not establish the protection of the complete installed assembly.
Use the chosen model’s power requirement and intended active channels over the connected length. Follow the supply manufacturer’s loading guidance and check controller capacity and cable losses. Similar-looking COB LED strip models may have different electrical loads.