5050 package
Separate square packages make LED spacing and diffuser depth important when the light line is directly visible.
SMD RGB color
5050 RGB LED strip for fitted color accents
Add controlled RGB color to a shelf, profile or fitted fixture. VST is a 5050 RGB LED strip supplier with versions for different voltages and installation needs.
- Compare the listed 12V, 12V/24V and 48V SMD 5050 RGB models.
- Match the strip to a compatible RGB controller.
- Check LED spacing behind the final diffuser.
- Specify leads and labels for repeated fixture assembly.
Color-strip selection
Choose the model for the color scene
Voltage, LED spacing and controller type affect the color you see in a finished shelf or sign. Check them in the profile you plan to use.
A 5050 RGB LED strip uses square SMD packages with red, green and blue sources. Conventional RGB versions apply a common color across the connected section. Addressable versions use a digital circuit to control separate sections. VST is a 5050 RGB LED strip manufacturer with models for display shelves, OEM products and longer retail lines. Check voltage, PCB width, LED count and controller requirements for the selected model before planning the profile assembly.
RGB control
Decide whether each connected section should display one color or whether the scene needs independently programmed zones.
Visible spacing
Check package spacing through the cover at the installed viewing angle. An open reel close-up will show a different effect.
Voltage choice
Use a supply and feed plan matched to the exact version. Keep 12V, 24V and 48V circuits distinct.
Repeat assembly
Agree prepared leads and model labels for repeated fixtures, helping the assembly team identify the correct color-strip version.
Package and control
The 5050 package and RGB control
5050 identifies an SMD package size; RGB identifies its three-color light function. Voltage, density and addressing still depend on the model.
A 5050 RGB LED strip can use different PCB widths, LED counts and voltages. Choose the model for the channel and color effect, then match its controller and feeds. Conventional RGB circuits change the connected section together, while addressable versions need a compatible digital signal. The profile, diffuser and distance affect the color you see. Check the complete model when deciding whether a reel suits a long run, a compact cabinet or a location exposed to moisture.
Selection factors
Checks for the installed color
Check the LED package, RGB circuit and protection choice, then test a color sample in place.
RGB circuit
The strip circuit and controller determine color behavior. Verify the selected model's control method before ordering.
Protection choice
Describe moisture and cleaning exposure when selecting a covered 5050 strip. Protection options depend on the exact construction.
Sample color
View the chosen color on the surrounding materials. A mounted sample gives you a more useful comparison than a catalog image.
Construction
5050 strip construction
Our RGB LED strip factory can help check the package, voltage and control circuit against the model selected for your fixture.
Light source
SMD 5050 LED package
Square 5050 packages create separate visible points along an open strip. Their spacing matters in a shallow shelf or sign return. A diffuser can blend those points, with the result depending on its finish and distance from the source. Mount a lit sample of the chosen model in the actual channel before approving the fixture's color accent.
Circuit carrier
Flexible RGB PCB
PCB width governs channel fit. Copper paths and solder pads provide the circuit's connection points. For a 5050 SMD RGB LED strip, check voltage and cutting interval in the model specification before preparing lengths or placing feeds. A drawing and short assembly sample let you check that the circuit and its connections fit the intended profile.
Connection point
RGB solder pads
The solder pads provide the interface for the selected RGB circuit. A prepared lead needs the correct connection arrangement and enough room at the host product's exit. Check the drawing and lead orientation before closing the housing. A generic connector's appearance cannot establish mating compatibility, so specify the connection for the exact strip model.
Video overview
Strip range and customer perspective
See the category overview and customer clip for context on the strip range and cooperation with VST.
LED strip product overview
The VST strip video introduces the range. Use the chosen 5050 model's specification when deciding voltage, control and the other components required by your fixture.
Customer perspective
Watch a customer's general perspective on working with VST. Assess color performance separately with a sample mounted in your display or hospitality setting.
Color applications
Match the scene to the channel
As a 5050 RGB LED strip OEM supplier, VST can help plan prepared lengths and labels for repeated fixtures. Match the sample to the viewing conditions in each space.
Retail displays
A merchandise shelf can use RGB light to outline a display. Check whether individual packages remain visible through the cover and how the selected color affects the products. VST can help compare a listed display-shelf model with your profile and discuss a sample for the assembled retail fixture.
Hospitality bars
A bar-back shelf can change atmosphere with a controlled RGB wash. Check reflections on glass and the controller's dimming behavior through the chosen channel. Ask VST about a suitable 5050 RGB LED strip configuration and a sample you can view against the bar's finished surfaces at the installed distance.
Exhibition booths
Modular stands need colored sections with connections that remain accessible after transport. Establish panel lengths, supply positions and diffuser joints at corners. VST can help check the chosen 5050 model and prepared leads against the booth module, so its connection layout is planned before the panels are assembled on site.
Signage returns
A shallow sign return can use a conventional 5050 RGB section for a fixed color or common scene. Check the depth and illuminated face, and decide whether independent animation is required. VST can help match the model and channel sample before sealing the sign, with a different control type considered for animation.
Furniture plinths
A furniture plinth can hide a strip in its lower edge and cast an accent onto the floor. Check ground clearance, cleaning exposure and wire access. Ask VST about profile fit and prepared lengths so the chosen model can be incorporated into the repeated furniture build and its service route.
Technical planning
Compare all three conventional 5050 RGB models
Compare the three published analog RGB models by power, LED density, PCB width and cut value. They apply one color across a connected section. The dual-voltage model needs a drawing that identifies the cut interval for the chosen version.
| Model | LED type | Control | V | W/m | LEDs/m | PCB mm | Published cut mm |
|---|---|---|---|---|---|---|---|
| S5050L54RGB1112 | SMD 5050 | RGB | 48V | 11.2 | 54 | 12 | 166.7 |
| S5050L30RGB0710 | SMD 5050 | RGB | 12V / 24V | 7.2 | 30 | 10 | 166.67 |
| S5050L60RGB1210 | SMD 5050 | RGB | 12V | 12 | 60 | 10 | 50 |
| Control detail | Model scope |
|---|---|
| RGB circuit | Conventional section-wide color control |
| Multi-voltage cutting interval | S5050L30RGB0710 lists one interval; request voltage-specific drawing |
For the chosen model, specify voltage, PCB width, LED density, control circuit, leads, color target and private labeling. Keep the exact SKU identifiable in the customization request.
VST can prepare the selected SMD circuit and check color, electrical behavior and appearance against the approved sample. Identify the voltage version on each reel.
Disconnect power. Connect only a matched RGB controller and supply, cut at the selected model's marked points, mount on a suitable surface and test the color scene before closing the channel.
Working with VST
Ordering and cooperation questions
Set the voltage version and controller first, then agree labels, quantity and production terms for that model.
Yes. Send the controller, profile and color scene so the sample reflects your finished fixture. Any credit of sample charges against a later bulk order needs to be agreed.
LED strip orders generally begin around 500 meters. Voltage, prepared leads or private labeling can change the minimum. VST will quote the quantity for your selected variant.
VST supports customized reel labels and packaging. Identify the approved model and voltage clearly so the assembly team can distinguish different circuits.
A regular product usually takes 2 to 3 weeks in production. Light customization takes about 3 to 4 weeks, and extensive changes commonly 4 to 6 weeks. Shipping is additional.
LED strips generally offer 2- or 3-year terms. A 5-year option applies only to selected products. Use the exact quotation and order specification for the model-specific term.
Samples can be paid by PayPal, Western Union or bank transfer in advance. Bulk orders generally use bank transfer, with 30% deposit and 70% payable before shipment.
Product decisions
5050 RGB strip questions
With a 5050 RGB LED strip, check the control format, visible LED pattern and division of the electrical sections. Test the chosen model behind your diffuser and alongside the materials that will surround it.
No. 5050 identifies the package size. Conventional RGB circuits change the connected section together, while addressable designs use digital control for separate sections. State the animation you need before choosing the circuit.
Compare LED spacing, mounting depth and diffuser material in the final profile. More depth or diffusion can soften the point pattern while also changing useful output and color appearance. Test the chosen model in the assembled section.
No. Choose the power supply to match the exact voltage version.
The selected controller must also support the circuit.
| Version | Check | Result |
|---|---|---|
| 12V | 12V-rated strip and supply | Use matched circuit |
| 24V | 24V-rated strip and supply | Use matched circuit |
| 48V | 48V model and controls | Separate design |
No. Diffuser transmission, surrounding materials and ambient light change perceived color. View a mounted sample at the planned distance before specifying the scene; a monitor image will not show those conditions.
Plan sections and feeds using the model's load, voltage, cut interval and acceptable voltage drop. Keep supply and controller connections accessible. VST can help compare your lengths with a listed option, while the electrical design needs to cover the whole installation.