Narrow fixed-white integration
S2835L78W0403 uses a 3.5mm board and a listed 4W/m load. Start here when the recess width is the main constraint.
View Product SMD integration choices
2835 LED strip selection for your lighting assembly
Find a 2835 LED strip that fits the product you are building.
- Compare published board widths and cutting intervals
- Choose fixed white, adjustable white or a specified color circuit
- Keep input voltage and control method tied to the model
- Ask VST for sample preparation around your installation detail
Start with the assembly
Specify the complete 2835 LED strip
The small emitter package allows different board and circuit designs. Two strips that look alike can therefore need different power supplies or mounting arrangements, so check the complete construction before selecting one for your product.
Describe the recess and the lighting function it needs. VST, a 2835 LED strip manufacturer, can narrow the choice by board width, cutting positions and the host electrical system. The connection and finished length must fit too. Reels with the same package designation are only interchangeable when the complete specifications suit the assembly.
Fit at the termination
Allow for the soldered lead or connector when checking clearance. The termination can be wider than the straight section of the board.
Cut-length resolution
Use the selected model's actual cutting interval when setting finished lengths. A small nominal board width does not guarantee a short cut unit.
Host-product interface
Identify the power source and who will supply the control. Select the complete circuit for those interfaces; the LED package's appearance cannot establish compatibility.
Engineering coordination
Match the strip to your product design
VST is a 2835 LED strip supplier that can turn your package preference into a model specification and assembly detail.
Mechanical shortlist
With a cross-section of the recess, our team can compare board widths and connection clearance before you build a detailed sample assembly.
Optical options
Describe the material you will illuminate and how you want it to look. We can discuss color temperature and color-rendering options for that task.
Electrical documentation
Record the supply and wiring plan for the chosen model. Your assembly team can use that information when validating the strip inside their product.
Prepared strip lengths
We can prepare leads and cut sections to an agreed drawing, reducing the full-reel handling needed when your team installs the strip in the finished product.
Package versus product
What the 2835 LED strip designation tells you
2835 refers to a nominal LED package format, approximately 2.8 by 3.5mm. It does not describe the overall width, voltage, brightness or color-control method of the strip.
A 2835 LED strip light includes a flexible circuit, emitters and the electrical components needed by its particular design. Published VST models span narrow fixed-white boards, higher-output constructions and separate color functions. Select the finished strip by its technical table. Changing the LED package number is not a sufficient replacement rule, and matching that number does not establish driver compatibility. Keep the model, voltage, light function and required cut length together in your bill of materials.
Representative models
Four routes through the 2835 range
As a 2835 LED strip OEM supplier, VST can prepare these models for the mechanical fit or optical result your design requires.
Compact general white lighting
S2835L120W1005 provides a 5mm board with 12V/24V versions. Match the ordered voltage and cut unit to the host-product supply.
View Product 
High color-rendering white
S2835L120H1408 lists CRI 98 and an 8mm board. Use the chosen white-light sample to assess the appearance of your actual material.
View Product 
Adjustable white light
S2835L168CCT1810 uses separate warm and cool white control. It requires a compatible CCT system rather than a fixed-white dimmer alone.
View Product Production inputs
Specify what the assembly team needs
Use the same assembly details for the sample and the order.
Width range
The catalogue includes several board widths, allowing a strip shortlist around a constrained opening. Connector clearance still needs its own check.
Termination choice
Discuss lead length and connector requirements before production so the selected electrical interface can fit the host product without unnecessary adapters.
White-light selection
Different white-light and CRI options belong to specific models. Use the chosen configuration consistently when comparing samples or ordering adjacent runs.
Packing by configuration
Reel and package identification can distinguish closely related models. Clear labels help prevent a strip with the wrong voltage reaching the assembly station.
Construction details
Three parts of a 2835 tape assembly
Check the visible construction for fit and handling requirements.
Emitting component
2835 LED package
The small rectangular SMD package is the visible light-source component. Its nominal dimensions do not establish flux, color consistency or lifetime. Those properties depend on the selected emitter and operating conditions. Treat the 2835 LED strip as a model-specific assembly when choosing material appearance or output, and avoid handling that presses directly on the package surface during installation.
Flexible carrier
Circuit board
The board sets the strip width, component positions and cut units, and carries the electrical paths between sections. Support it evenly inside the product and follow its intended bending direction. Sharp sideways folds can strain copper paths and solder joints. At a cabinet corner, use a lead transition if there is not enough room for the tape to follow a natural curve.
Connection detail
Input lead
The input lead connects the strip to its power or control system. Its length and conductor selection belong in the assembly specification rather than being improvised after mounting. Provide a protected entry, polarity identification and access to the joint. A prepared lead can simplify integration, but it still needs a compatible termination and a route clear of moving parts.
Company context
VST's strip range and customer service
Introductions before discussing the engineering details.
From strip category to model
Watch VST's LED strip introduction, then describe the recess and lighting function your product needs. This gives the team a basis for choosing a model, since 2835 strips can have different board layouts and electrical requirements.
Following the communication process
The customer video introduces working with VST. For an integration project, assign responsibility for drawings, sample revisions and order details. Both teams then know which strip version to use when a change to the surrounding product affects the lighting assembly.
Integration examples
Where a 2835 LED strip can fit
Each application needs a different assembly decision.
Wardrobe uprights
Vertical lighting inside a wardrobe can illuminate clothing without taking useful storage space. Check the recess width, door clearances and the cable exit at the top of the cabinet. VST can help select an appropriate white-light strip and prepare lead lengths for that upright, with a sample to assess visibility from the open doorway.
Retail shelf edges
A compact strip along a shelf front can light merchandise on the level below. Establish the distance to the products, required color appearance and the room available behind the front lip. We can compare narrow-board options and prepare the cut sections for a shelf module, helping you keep its connection accessible during shop fitting.
Equipment compartments
A protected equipment compartment may need localized white light for access and servicing. Check the available supply, internal temperature and how the lighting circuit is isolated from other functions. VST can discuss a suitable strip model and termination for evaluation within the equipment; final host-product validation remains specific to the complete assembly.
Furniture reading recesses
A headboard or fitted reading recess needs enough local light without exposing the source directly to the seated person. Assess shielding depth, material color and the position of the switch or dimmer. Our team can provide a white-light sample and a prepared lead option suited to the furniture construction and its accessible connection space.
Architectural white coves
A 2835 tape assembly can follow a concealed cove in a commercial interior. Determine the permitted board width, wall setback and whether the design needs fixed or adjustable white light. VST can help select the relevant circuit and plan prepared lengths, leaving the final diffuser and cove mock-up to establish the desired visual result.
Define your interface
Start with the space and the electrical supply
Send the available width, lighting function and quantity. As a 2835 LED strip wholesale supplier, VST can quote the model and preparation work needed for your assembly.
Model data
Published 2835 LED strip constructions
Start with the required function, from fixed white to addressable RGB. These eight representative models show the main choices; each linked product page gives its own specifications.
| Selection Route | Representative Model | Voltage | W/m | PCB Width | Cut Interval | Use It When |
|---|---|---|---|---|---|---|
| Narrow fixed white | S2835L78W0403 | 12V | 4 | 3.5mm | 38.5mm | Space is tight and a compact fixed-white circuit suits the product. |
| High-CRI white | S2835L120H1408 | 12V / 24V | 14.4 | 8mm | 50mm | You need to assess colored materials under dedicated white light. |
| Higher-output white | S2835L240W2210 | 24V | 22 | 10mm | 33.33mm | The assembly needs more white output and sufficient cooling is available. |
| Adjustable white | S2835L168CCT1810 | 24V | 8.6+8.6 | 10mm | 83.3mm | The application needs warm-to-cool white adjustment through a CCT controller. |
| 48V fixed white | S2835L120W1010 | 48V | 9.6 | 10mm | 100mm | Your system uses a 48V supply; plan feed positions for the installed length. |
| Analog RGB | S2835L120RGB1408 | 12V / 24V | 14.4 | 8mm | 50mm | The whole connected run should display the same commanded color. |
| RGB plus white | S2835L48RGBW0910 | 12V / 24V | 9 | 10mm | 250mm | You need color and a dedicated white channel in one strip. |
| Addressable RGB | S2835L96RGBD1606 | 24V | 16 | 6mm | 62.5mm | Moving segments are required; match the controller protocol to this model. |
VST can discuss custom lengths, wire exits, terminations, labels and packaging. As your 2835 LED strip supplier, we distinguish preparation of an existing model from development of a new circuit or board, so the sample work addresses the requested change.
SMD assembly places components onto the circuit before soldering and inspection. Model-specific materials and process controls matter more than the shared package name. Maintain the chosen board, emitter and connection specification through final checks and packing.
Disconnect the supply. Cut at the permitted marks, mount the board on a suitable surface and protect the electrical joint. Verify the ordered voltage and controller type before energizing. Test the strip inside the host product, including access, operating temperature and any dimming function.
Integration feedback
Comments on the development work
Small technical details can make cooperation easier.
Working with VST
Supply questions for integration projects
Set commercial terms against the model and development scope.
The general LED strip starting quantity is 500 meters. Model-specific stock and preparation requirements may change the quoted minimum. Identify the exact voltage and light function so quantities are not accidentally combined across different products.
Sample preparation can be discussed before bulk production. Charges are quoted for the work involved and may be credited against a later order by agreement. Extensive development may also need separately agreed tooling expenditure.
Typical production is 2-3 weeks for regular products, about 3-4 weeks for light changes and about 4-6 weeks for extensive customization. The production plan depends on materials and order scheduling; these periods do not include transit.
Bank transfer is the normal bulk-order method, with a 30% deposit and the remaining 70% before shipment. For samples, PayPal, Western Union and bank transfer are supported with payment made entirely in advance.
Remaining product questions
Before you specify a 2835 LED strip light
Before replacing or integrating tape, check its circuit and installation limits. The questions below cover details that a package number cannot settle, particularly when the proposed strip looks similar to one you have used before.
Compare the complete assembly, not only the LED designation.
| Existing detail | What must match |
|---|---|
| Power supply | Strip voltage and connected load |
| Control system | Channel function and electrical interface |
| Mounting recess | Board and termination dimensions |
| Finished length | Permitted cut positions |
No. Check board width, pad count, pad spacing and any coating thickness against the connector. Some terminations need a soldered lead instead. The nominal emitter size says nothing about whether a particular clip can contact and retain the board correctly.
Only if the bend follows the model's permitted direction and radius. A tight corner can stress components or conductors even when the flexible board appears to bend. Send the host geometry for a suitable assembly approach rather than forcing the tape to follow it.
No. CRI is one color-rendering measure. If the application depends on a particular material appearance or another spectral metric, request the relevant data for that white-light configuration and assess the material under a sample. Do not derive missing metrics from the package type.